Mastic epoxy paint 457CE base: 457C7 hardener: 957CE Overview: Epoxy Mastic is a two-component paint 457CE, high solids epoxy mastic paint, can form a hard film, has good wetting and low temperature curing properties. Uses: Used in atmospheric environment as the new building and its maintenance with matching intermediate futures primer. Physical parameters: Color / Color: Red / 50630 and gray / 11480 micaceous iron gray / 12430 (with micaceous iron oxide pigment) Paint: Flat Flat Volume solids: 81 ± 1% 81 ± 1% Theoretical spreading rate: 4.12 / liters (200 microns dry basis) 4.12 / liter (200 microns dry basis) Flash Point: 25 ° C 25 ° C Specific Gravity: about 1.6 ± 0.1 kg / l 1.8 ± 0.1 kg / liter Dry to touch: 3 hours (20 ° C) 3 小时 (20 ° C) to fully cure: 7 days (20 ° C) 7 天 (20 ° C) VOC: 200 g / liter 201 g / liter content (VOC): Note: Weathering nature / Temperature: As the epoxy coating, the product is easy to chalk in outdoor exposure. When the temperature rises, more mechanical damage and chemical sensitivity. Thickness / dilution: depending on purpose and area film thickness can be adjusted, which will alter spreading rate, drying time and recoating interval. Normal dry film thickness in the range of 125-250 microns. Recoat: recoat should refer to the coating supporting surface during use is subjected to regular immersion, serious condensation and temperature fluctuations, chemicals or abrasive actual situation, in other cases not for Hempel Epoxy recoat. If the maximum recoat, brushed surfaces need to ensure good interlayer adhesion. Construction then sprayed zinc surfaces and zinc silicate surface: If the paint temperature is above 20 ° C, recommended "mist" approach to spray this product, namely: Spray with diluted 457CE a thin layer of the substrate surface, a few minutes and then spray a second coat to achieve complete thickness of the paint film (thickness reference to the provisions of the zinc silicate surface coating film thickness). If the paint temperature is below 20 ° C, it may need to be diluted up to 15%. Gary | ?? Sales Phone:? 021-6958010024 hour free service hotline: 17749768756 Fax: 021-69580100-816 QQ: 2477229652 Mail: 2477229652@qq.com?