Gary | ?? Sales Phone:? 69580100-80824 hour free service hotline: 17749768756 Fax: 021-69580100-816 QQ: 2477229652 Mail: 2477229652@qq.com Company Website: http: //www.akhzo.com? / ultra-thin fireproof coatings 43600 HEMPACORE ONE 43600 outdoor ultra-thin fireproof coatings Overview: HEMPACORE 43600 is a single-component solvent-based, physically drying-retardant coating for steel fiber type of passive fire protection, suitable for workshop and offsite construction. Uses: 1, can be used as fire protection for indoor and outdoor steel structures for word-beams and columns and hollow sections. 2, as the product has just been repaired after the construction and fill paint damage areas. 3, each coat dry film thickness of the construction of up to 1500 microns (2000 microns wet film equivalent). Certificates: meet the standard GB14907-2002 requirements, fire protection up to 2.5 hours. According ETAG018 second part of the requirements to become ETA12 / 0581 European technical approval of the product with the CE mark. By Certifire No. CF 5146 certificate. Tested in accordance with EN13381-8 and BS476-21 requirements, approval of the fire protection paints and coatings up to 120 minutes. Some of the main structure limited in many critical temperature even up to 4 hours protection. Physical parameters Color / Color: White / 10000 Paint: Flat Volume solids: 75 ± 3% Theoretical coverage: 1 square meter / liter, dry film thickness of 750 microns Flash Point: 23 ℃ Weight: 1.35 kg / liter table dry: 30 minutes (20 ℃, 750 microns) dry to touch: 35 minutes (20 ℃, 750 microns) to fully cure: 8 hours (20 ℃, 750 microns) VOC: 346 g / liter content (VOC): Shelf life: 12 months Construction Description Construction method: airless spray; brush; knife Thinner: do not recommend the use of spray holes: 0.43 mm -0.58 mm discharge pressure: 20 MPa (Airless spray data for reference only, You can adjust practically) Cleaning of tools: Thinner 08080 or elderly person license plate tool cleaner 99610 specified dry film thickness: film thickness and required to achieve fire safety requirements and the applied load factors of steel units can be made to the company on behalf of request more information. Recoat: See related Application Guidelines Safety: Be careful when handling, before and during use, view the package and all safety labels on paint bucket, query the company's Material Safety Data Sheet and follow all local or national regulations. Finish: The product should be blast substrate to pre-construction Sa2.5 level (ISO8501-1), and construction of a suitable primer. With a suitable cleaning agent thoroughly to remove grease, etc., salt and other contaminants washed with high-pressure water. Steel must be coated with a primer approved by the Company. Under conditions of limited circumstances, mechanical grinding to ST3 will be accepted in the relevant requirements of the construction guide. Sprayed zinc surfaces, thermal sprayed aluminum or stainless steel substrate surface requires a different surface treatment, please consult the Application Guidelines for specific details. Construction conditions: Construction conditions: temperature range of 5 ℃ --- 50 ℃, the construction and the drying process in the limited space should provide sufficient ventilation. Preceding coat: under construction only to coated primer approved by the Company, please consult the relevant primer approved by the Company to the Company's technical representative. Add Tu paint: It can be used when you need to increase the thickness of the outside coating. The coating of the purpose of supporting the trial, you may need a good compatibility with the goods and approved topcoats, please consult the selection of the finish under what circumstances the company's technical representatives. Note: Color / Color stability: This product provides only white, but you can add any other color of the coat-approved finish. This product has a thermoplastic and ductility, when the temperature is above 40 ℃ mechanical action of the film will be indentation, when the temperature drops, the mechanical strength restored by. WEATHERING / temperature: This product is at moderate outdoor conditions can be exposed for 6 months, if you need to be exposed longer to the company recognized the need topcoat finish. During the construction phase and supporting the use of fireproof coating stage, we must avoid surface water. Thickness: dry film thickness and required to achieve fire safety requirements and the applied load-bearing steel unit factors, may request more information to the Company's local representatives. In order to achieve the required fire safety requirements, it is important that all regions should be coated with a minimum dry film thickness, but do not exceed the thickness of the film thickness required too much, please consult Application Guidelines for more information. Each coat dry film thickness of up to 1,500 construction microns (2000 microns wet film equivalent). Re-coating: multi-channel construction, the minimum recoat affected by the actual thickness and the number of road construction, reference may be guiding the construction in dry timetable. Fire finish construction before the required thickness of the coating must be achieved. If the coated surface of the coating in good condition, clean, dry and no other pollutants, can recoating.