Gary | ?? Sales Phone:? 69580100-80824 hour free service hotline: 17749768756 Fax: 021-69580100-816 QQ: 2477229652 Mail: 2477229652@qq.com Company Website: http: //www.akhzo.com? / acrylic enamel 561CE Overview: acrylic enamel 561CE is an acrylic resin and non-chlorinated plasticizer for the base material prepared from the lacquers, having the desired gloss and color retention. Physically drying. Water-resistant, also resistant to stain fatty substances through animal and vegetable oils. Uses: As a chlorinated rubber and acrylic paint applied in supporting moderate to severe corrosive environments inside and outside surfaces. Physical parameters: Color / Color: Black / 19990 (available in other colors according to the color classification list) finish: Semi-gloss Volume Solids: about 31 ± 1% Theoretical spreading rate: about 8.92 / liter (35 microns dry meter) Flash point: 25 ° C Specific Gravity: 0.9 kg / liter Surface dry: 1 hour (20 ° C) Touch dry: 3-4 hours day (20 ° C) VOC: 606 g / liter content ( VOC): Note: Color: Certain lead-free red, yellow after exposure to chlorine in the atmosphere, may be discolored. Lead paint pigment formed by exposure to sulfur in the atmosphere may become discolored. To gain full cover the effects that may require additional spraying once the goods, especially for certain lead-free red, yellow, orange and green is even more so. Temperature: at temperatures above 40 ° C, prolonged mechanical action film will sag. Construction: If you want non-slip surface, should take advantage of this product is the first layer of coating is dry, with a pink slip Hempel 67,500 spread evenly finish, after paint dry, the lower surface of the excess slip powder brush, and then the construction of the second Road goods. Like 20 liters of this product have added 1 kg slip bead 67420 Hempel mix, get non-slip effect. Film thickness: maintenance work may cause repeated total paint is too thick, because entrapped solvent leaving the paint blistering. As each coat may residual solvent, it is generally recommended trying the product, the film can not be too thick. Thinner: Type and amount depending on construction conditions, construction method, temperature, ventilation and substrate condition diluent may be. In general, we recommend using Hempel Thinner 014CN. Recoating: Before polluted environment are exposed to the film and then re-coated, high pressure fresh water required to completely clean the surface.