Hempel epoxy zinc-rich primer 171CE base: 171C7 hardener: 971CE Overview: Hempel epoxy zinc-rich primer 171CE is a two component epoxy zinc-rich paint. It can be cured to form a tough, corrosion-resistant film. Uses: 1, as a "VOC-compliant" products for the steel surface moderately to severely corrosive environment. Can also be coated with a zinc shop primer for steel surfaces - prior to coating, the damaged area of ??the steel surface, welds, etc. must be cleaned with a power tool. 2, the construction site for the container, the zinc content of the product in line with SSPC-Paint20, the provisions of type2, level3; the physical parameters: Color / Color: Red Grey / 19830 finish: Semi-Flat Volume solids: 66 + 1% of theory Coverage: 13.22 / liter (50 micron dry film) Flash point: 24 ° C Weight: 2.3 kg / liter Dry to touch: about 3 hours (20 ° C) (ISO 1517) is fully cured: 7 days (20 ° C) VOC: 324 g / liter content (VOC): Construction Description: Finish: New steel: with a suitable cleaning agent thoroughly to remove oil and grease and so on. By (high pressure) fresh water to clear the salt and other contaminants. Abrasive blasting to Sa2.5 level. As a temporary protection, if necessary, use suitable zinc shopprimer. Before construction, all storage and assembly damaged shopprimer and contamination must be removed, the FDA can be repaired and painted up. FIX: thoroughly with suitable detergent to remove grease and dirt. By (high pressure) fresh water to clear the salt and other contaminants. The best way to use in dry blast remove rust and other loose material. It can be used to clean a small area of ??power tools. Note: VOC-EU Directive 2004/42 / EC: Product undiluted 15% dilution volume of the second phase limits, 2012 171CE19830 324 g / liter 404 g / liter 500 g / liter stirred: in and hardener before mixing, stir base and prevent possible sedimentation after storage. Once mixed, the paint should be stirred constantly to maintain a uniform so before it runs out. It is very important in case of transition after dilution or mixing stagnant too long, there is a risk of too much zinc dust settling. Construction: Use proper detergent to clean surface dirt, grease or other foreign matter, and then use (high pressure) fresh water rinse. In addition, the application of a new hard brush corrosion products (white rust). Thickness / Dilution: to change the designation of the film thickness, it will lead to spreading rate, drying time and recoat interval. The normal range of 50-75 microns dry film thickness. (For rough surfaces, dry film thickness range does not consider the correction factor, as the ISO 19840.) Introduction A Hezuo Industrial Protective Coatings (Shanghai) Co., Ltd., established in 2006, is a professional in Shanghai imports of industrial protective coatings The company, set sales, construction, technical support guide as a whole. For the country to provide high-quality, environmentally friendly heavy-duty coatings. Company to "professional, honest and trustworthy" as the central value. Over the years by the same recognition and praise all sectors of business cooperation, for enterprises to win excellent reputation. A Hezuo adhering to user needs as the center, the focus of industrial protective coatings market open, but also with the world's top industrial protective coatings brands: ????? Akzo Nobel, PPG, Sherwin-Williams, Haihong, COSCO Kansai and other international brands to establish a good partnership. "Environmental protection, high-quality, motive" service won the trust of many enterprises and praise, in China to gradually establish a good reputation 阿赫佐. Gary | ?? Sales Phone:? 69580100-80824 hour free service hotline: 17749768756 Fax: 021-69580100-816 QQ: 2477229652 Mail: 2477229652@qq.com Company Website: http: //www.akhzo.com? /