Mastic epoxy paint 450CE base: 450C7 hardener: 950CE Overview: Epoxy Mastic paint 450CE is a polyamide adduct cured epoxy high solids was mastic. Paint tough film with good wettability, low temperature curing. Uses: Can be used for self-made surface tolerant primer coating scheme. Also available for intermediate coat and topcoat with the requirements of low VOC and thick syrup in heavy duty paint matching. According to the specification required to do a multi-purpose paint repair. You can specify for the need to extend the recoat coated polyurethane topcoat to add occasions (often referred to as the transitional coat). Can be directly applied to the cured primer zinc silicate (GALVOSIL products) or metal spraying the surface to reduce foaming. If you have to look under the epoxy coating for outdoor environment is acceptable, then the product can also be use as a topcoat. Physical parameters: Color / Color: Gray / 12170 (other colors can be found in the list) finish: Semi-gloss Volume solids: 80 ± 1% Theoretical spreading rate: 6.42 / liter (200 microns dry basis) Flash point: 39 ° C Specific Gravity: about 1.5 kg / liter Dry to touch: about 4 hours (20 ° C) (ISO1517) fully cured: 7 days (20 ° C) VOC: 217 g / l content (VOC): Remarks : Volatile Organic Content: undiluted diluted 5% (by volume) Phase II in 2010, 217 g / liter 249 g / liter 500 g / liter weathering / temperature: When the product is easy to chalk in outdoor exposure at high temperature and easy affected by mechanical and chemical action. Film thickness / Dilution: Can a non-recommended film thickness depending on purpose and area of ??use, which will alter spreading rate and may influence drying time and recoating time. Normal dry film thickness of 125-200 microns. If you need additional dilution can also lower film thickness construction, please refer to the relevant construction know. Avoid too thick film thickness. Color: This product can also offer other colors, including the use of MIO tone color (color number 12430) and the use of aluminum tone color (pale pink 19870 aluminum, aluminum deep pink good 19000). Construction: If the paint temperature is above 20 ° C, the construction of this product is recommended by the spray method: a first spray undiluted this product, a few minutes before the required film thickness and full once the goods. In particular, as the temperature is below 20 ° C, it is necessary to dilute (maximum 15%). Hardener: hardener 950CE was cloudy, which is to be expected, no adverse effects on performance. A Hezuo Protective Coatings (Shanghai) Co., Ltd., established in 2006, is specialized in Shanghai imported industrial protective coatings, protective coatings civilian company set sales, construction, and technical guidance for the whole package. For the country to provide high quality, environmentally friendly protective coatings. Free hotline: 4001-085-08024 hours Order Tel: 177-4976-8756 Contact:? Gary company's official website: www.akhzo.com